HXMD LD700RC Excavator Tooth
| Part No.: | LD700RC |
| Bucket Teeth Type: | Rock Chisel Bucket Tooth |
| Compatible Brand: | SANY Excavator |
| Production Process: | Forging |
| Hardness: | HRC48-52 |
| Tensile: | 1450MPA |
| Impact: | ≥20J/cm2 |
The forged bucket teeth from HXMD brand offer the following advantages:
1. High Wear Resistance: Due to the high-temperature forging process, the hardness and wear resistance of the forged bucket teeth are significantly enhanced. This allows the teeth to maintain a long service life even when dealing with hard digging materials such as rock or concrete.
2. High Strength: The forging process compresses the metal and refines the grain structure, thereby improving the overall strength of the bucket teeth. This increased strength helps the teeth maintain structural integrity during high-load digging operations.
3. Optimized Heat Treatment: The forged bucket teeth undergo precise heat treatment processes during production, which helps to enhance their hardness and toughness. For example, 30CrMnSi steel can achieve the highest impact toughness at 870℃ water quenching after simulated forging residual heat quenching process.
4. Environmentally Friendly Production: Compared to cast bucket teeth, the production process of forged excavator tooth is more environmentally friendly. The raw materials used are chromium-molybdenum alloy round steel produced by large steel mills, not recycled alloy steel, and coal heating is not used during production, reducing environmental pollution.
5. Sophisticated Manufacturing Process: The production process of forged bucket teeth is complex and meticulous. From mold processing to the final product, each step requires strict control and close cooperation among multiple workers, ensuring high quality and consistency of the products.
6. Cost-Effectiveness: Although the initial cost of forged bucket teeth may be higher than cast bucket teeth, their longer service life and lower maintenance costs make them more cost-effective in the long run.
7. Ease of Maintenance: The design of forged bucket tooth usually takes maintenance convenience into account, making it easier to replace or repair when needed, reducing downtime and improving equipment utilization efficiency.
These advantages make HXMD's forged digger teeth an ideal choice for excavator and loader users facing various digging operations.
* High wear resistance and strength due to high-temperature forging.
* Environmentally friendly production and sophisticated manufacturing process.
* Optimized heat treatment for enhanced hardness and toughness.
LD700RC Excavator Rock Bucket Teeth Main Feature:
Gold Forging excavator parts for LD700RC excavator tooth, forged process ensure good wear re-sistance.
Application: Machinery Repairs Shop, Energy & Mining, Rent Service Company, Second Hand Machinery Store, Construction Works, etc.
Good quality: From raw material, bucket teeth process and finish product, all processes are in one factory, we are carefully controlled manufacturing processes guarantee reliability .
Good service: Rich experience to do OEM business .High efficiency work team, no trouble and waiting during your entire projects, 7x24H after-sale service.
Aftermarket FORGED BUCKET TEETH
| Brand | Machinery Type | Part No. | Weight(kg) | Pin&Retainer |
| Caterpillar | J225 | 6Y3222RC | 2.9 | 6Y3228/8E6259 |
| Caterpillar | J350 | 1U3352RC | 7.5 | 8E6358/8E6359 |
| Caterpillar | J350 | 1U3352RC (LONG) | 8 | |
| Caterpillar | J400 | 7T3402RC | 9.5 | 7T3408/8E8409 |
| Caterpillar | J400 | 7T3402TL | 8.3 | |
| Caterpillar | J450 | 9W8452TL 1U3452RC | 13.5 | 8E0468/8E0468 |
| Caterpillar | J450 | 9W8452RC 1U3452TL | 12.0 | |
| Caterpillar | J550 | 9W8552TL 1U3552TL | 17.5 | 6Y8558/8E5559 |
| Caterpillar | J550 | 9W8552RC 1U3552RC | 20.5 | |
| Kobelco | SK350 | SK350RC | 9.5 | 8E6358/8E6359 |
| Kobelco | SK350 | SK350TL | 8.3 | |
| Komatsu | PC60 | 201-70-24140 | 1.8 | 20X-70-00100 |
| Komatsu | PC60 | 201-70-24140RC | 1.8 | |
| Komatsu | PC60 Adapter | PC60-20 | 2.5 | |
| Komatsu | PC100 | 20X-70-23161RC | 2.6 | 203-70-74281 |
| Komatsu | PC100 Adapter | 202-70-12140-25 | 3.3 | |
| Komatsu | PC200 | 205-70-19570 | 4.5 | 09244-02496 |
| Komatsu | PC200 | 205-70-19570RC | 5.1 | |
| Komatsu | PC200 | 205-70-19570 (LONG) | 6.1 | |
| Komatsu | PC200 | 205-70-19570TL | 5.4 | |
| Komatsu | PC200 Adapter | 205-939-7120-40 | 7.3 | |
| Komatsu | PC300 | 207-70-14151RC | 8.5 | 09244-02516 |
| Komatsu | PC300 | 207-70-14151TL | 8.3 | |
| Komatsu | PC300 Adapter | 207-70-14151 | 12.5 | |
| Komatsu | PC400 | 208-70-14152RC | 14 | 09244-03036 |
| Komatsu | PC400 | 208-70-14152TL | 12.4 | 09244-03036 |
| Komatsu | PC400 | 208-70-14152RC(LONG) | 16.3 | 09244-03036 |
| Volvo | V210/V290 | 14530544RC | 7.5 | 2705-1020/2114-9008 |
| Volvo | VOLVO360/460 | 14536800/14537843TL | 13.0 | 1454-0728/1455-0968 |
| Volvo | VOLVO480 | 14536800TL/14537843TL | 14.7 | |
| Volvo | VOLVO480 | 14536800RC/14537843RC | 19.8 | |
| Volvo | VOLVO360/460 | 14536800/14537843RC | 15.6 | 1454-0728/1455-0968 |
| Daewoo | DH130/DH150 | 2713-1221RC | 3.9 | 2705-9014/2705-9015 |
| Daewoo | DH150 Adapter | 2713-1221 | 5.6 | |
| Daewoo | DH220 | 2713-1217RC | 5.5 | 2705-1020/2114-9008 |
| Daewoo | DH220 | 2713-1217RC(LONG) | 6.3 | |
| Daewoo | DH220 Adapter | 2713-1218-40 | 8.3 | |
| Daewoo | DH300 | 2713-1219RC | 8.5 | 2705-9010/2114-1849 |
| Daewoo | DH360/370 | 2713-0032TL | 6.6 | 2705-1021/2114-1849 |
| Daewoo | DH360/370 | 2713-0032RC | 10.5 | 2705-1021/2114-1849 |
| Daewoo | DH420/500 | 2713-1236RC | 11.0 | 2114-1849/2114-1849 |
| Sany | SY65/ SY75 | 12076809 | 2.6 | |
| Sany | SY55 | 12076675 | 1.8 | |
| Hitachi | EX-70/6 | 6Y3222 | 2.9 | 6Y3228/8E6259 |
| Gold Forging accept brand name custom logo, need more detail, pls contact with us. | ||||
Bucket teeth have a wide range of applications, primarily including the following areas:
1. Excavators: Bucket teeth are the main wear parts of excavators, similar to human teeth, consisting of a tooth base and a tooth tip. They are used for digging and loading operations. During excavation, excavator bucket teeth directly contact materials, enduring significant impact and wear.
2. Loaders: Loaders also require digger teeth to enhance loading efficiency and protect the loader bucket. Loader bucket teeth play a role in cutting and loading materials during the loading process.
3. Construction: Bucket tooth are widely used in various construction projects, such as road construction, bridge construction, and tunnel excavation, for digging and loading earth and stone.
4. Mining: In mining operations, bucket teeth are used to dig hard ores such as iron ore and stone. They need to have high wear resistance and strength.
5. Earthmoving: Bucket tip are used in earthmoving projects to dig and load soil, sand, and gravel, suitable for different soil and rock conditions.
6. Coal Mining: In coal mining, bucket teeth are used to excavate coal seams and must have good wear resistance and impact resistance.
7. Other Construction Machinery: Bucket teeth are also widely used in other construction machinery fields, such as bulldozers and scrapers.
The selection and use of bucket teeth need to be determined based on specific application scenarios and working conditions to ensure excavation efficiency and service life.
Different brands and models of excavators, loaders, and other construction machinery have varying performance requirements for bucket teeth.
About Gold Forging:
As professional forged excavator bucket teeth manufacturer, Gold Forging insist on Quality First, Customer First, continuously introduce new machines to improve production efficiency, improve customer satisfaction with our company.
We produce all kinds of ground engaging tools replacement parts for earthmoving, mining ,construction equipments, such as Bucket tooth, tooth adapter...
Our factory located in Quanzhou city, near Xiamen port nearly 1 hour, and we have 3 complete production lines in our factory, fast deliver time and large stock in our warehouse.
Our Bucket teeth are designed for improved performance and wear life and are the ideal choice for all operators looking for quality and value, from the initial inspection of incoming material to the quality inspection of production completion, all is under our control.
Current our factory has over different models bucket tooth to meet popular excavator brand in market, like Caterpillar, Komatsu, Daewoo/Doosan, Volvo and other brands.
At the same time, we have also developed a matching bucket adapter and tooth pin and retainer, which can better match the customer’s machines.
In the future, we will continue to develop new forged bucket teeth to fit more different models.
Gold Forging welcome every customer to come for a visit and setting up win-win cooperation with our company.
Gold Forging - Your Reliable Partner!
