HXMD
CAT E325
7T3402TL
CHINA
HRC48-52
FORGING
YES
GREY/BLACK
5-7days can deliver if in stock
| Part No.: | 7T3402TL |
| Bucket Teeth Type: | Bucket TIGER Teeth |
| Compatible Brand: | CATERPILLAR |
| Production Process: | Forging |
| Hardness: | HRC48-52 |
| Offer customized Service: | Yes |
The bucket tooth is the terminal of the excavator's working device. In the process of mining, the bucket tooth is the working part with the largest load. It belongs to the consumable parts, especially in the stone construction environment, the bucket tooth wear speed is particularly fast. The use of bucket teeth can directly affect the work efficiency and production cost of excavators.
When the tip of the bucket tooth is worn more seriously, the strength required by the excavator when cutting in the digging operation will be greatly increased, resulting in greater fuel consumption and affecting the work efficiency. Therefore, when the bucket tooth loss is more serious, it is necessary to replace the new bucket tooth in time.
In the daily maintenance of the excavator, it takes 2 minutes to check the bucket every day. The main check content is: the bucket body is the degree of wear and whether there are cracks, if the degree of wear is more serious, it should be considered for reinforcement. As for the crack of the bucket body, it should be repaired in time to avoid increasing the length of the crack because of delayed maintenance, resulting in unable to maintain the situation. In addition, the bucket teeth should be kicked to check whether the bucket ruler is stable. If the bucket teeth are loose, they should be tightened immediately.
| Part No.: | 7T3402TL |
| Bucket Teeth Type: | Bucket TIGER Teeth |
| Compatible Brand: | CATERPILLAR |
| Production Process: | Forging |
| Hardness: | HRC48-52 |
| Offer customized Service: | Yes |
The bucket tooth is the terminal of the excavator's working device. In the process of mining, the bucket tooth is the working part with the largest load. It belongs to the consumable parts, especially in the stone construction environment, the bucket tooth wear speed is particularly fast. The use of bucket teeth can directly affect the work efficiency and production cost of excavators.
When the tip of the bucket tooth is worn more seriously, the strength required by the excavator when cutting in the digging operation will be greatly increased, resulting in greater fuel consumption and affecting the work efficiency. Therefore, when the bucket tooth loss is more serious, it is necessary to replace the new bucket tooth in time.
In the daily maintenance of the excavator, it takes 2 minutes to check the bucket every day. The main check content is: the bucket body is the degree of wear and whether there are cracks, if the degree of wear is more serious, it should be considered for reinforcement. As for the crack of the bucket body, it should be repaired in time to avoid increasing the length of the crack because of delayed maintenance, resulting in unable to maintain the situation. In addition, the bucket teeth should be kicked to check whether the bucket ruler is stable. If the bucket teeth are loose, they should be tightened immediately.
